Installing DIY Floating Wall Desk

Nov 1st
wooden floating wall desk

Floating wall desk – A floating wall desktop uses the same basic design as a floating shelf, obscuring the support structure in a hollow part of tabletop. Goal length of the inside of your work surface. Install the first wall of the beam, it cuts to least two-wall studs. Set one of the leg beams in position on other side of the beam wall, protruding at right angles from the wall.
The screw themselves in place by two wood screws per joint, drilled in through the bar of the leg and into the end of the wall jet. Coins the second wall beam with one than the flush side of the middle leg beam. Placing the final leg beam to end of the second wall beam for floating wall desk.
Installing floating wall desk, push the worktop over the wall brace structure. Screws it in place along the back, a wood screw for every 4 inches, driven through the work surface in the bars behind. Place screws around 1 inch from wall. Add two more screws near the front of the table top, 1 inch from each edge and 2 inches from front. All screw parallel to the wall, up through the surface of the table and into the beam behind. Paint or stain as desired.

Best Post |  Fold Away Desk for a Corner Room

12 Picture Gallery: Installing DIY Floating Wall Desk

This post topic: Desk Design

Other Interesting Things About Desk Design Photos