Queen size bed frame with drawers – A set of drawers underneath a full size bed allows you to tap and organize more than 25 square feet of storage space. Although you can spend hundreds on a prefabricated frame bed with drawers under the bed, in building their own half of the cost it is a project within the scope of most beginner and intermediate woodworkers. These plans are for a full frame size or double platform with drawers underneath, but you can build for any size mattress adjusting the sizes of wood.
Use your power saw to cut plywood sheets purchased to the required dimensions. Sand all faces of all wood twice, once with sandpaper once coarse and fine-grained paper. Apply a coat of paint to all the wooden surfaces. Let dry. All four beams since 2 8 on the floor, parallel to each other and with aligned ends. All four beams must rely on their narrower sides, 2-inches. Set 33 inches apart beams from inside edge on edge. Set two of its 54-inch sheets of plywood 37 1/2 inches from side to side in the top of the frame formed by the beams. Screw them in place with wood screws 16, two screws evenly spaced sheet by the beam. Screw the screws through the plywood and the beam underneath.
12 Picture Gallery: How to Build a Queen Size Bed Frame with Drawers
Turn the framework for remaining in the plywood. The remaining two 54 inch 37 1/2-inch plywood sheets and joining beams, like the first two. Two get 7 1/2 inch wide plywood sheets, one 24 inches long and one 33 inches long. L-shaped set with the shorter blade at the end against the longest. Nail them in place with three nails. Repeat step one queen size bed frame with drawers with two more sheets of plywood the same size, construction of a second form of L. Connect the L shapes to form a rectangular frame: the walls of the box. Use three nails per corner to glue them.
Set the 25-inch sheet of plywood 33 inches at the top of the frame. I connect with a nail at each corner, driven through the sash and frame underneath. Reinforced with two nails per side, evenly spaced nails the corner. Turn the drawer box. Attach a drawer or cabinet pull up the center of a 33 inch sheet of plywood 7 1/2 inches. Repeat steps 1 to 5 twice more, for the construction of two more drawers. If your bed will sit with both long ends exposed, build a total of six drawers, three for each side. Slide the drawers in the gaps between the beams of the bed so that the attraction is out. Finally, now you have queen size bed frame with drawers.
This post topic: Queen Bed Frame